Tel Number
181-3719-5600
Brief Introduction:
Vacuum Brazing Furnace is excellent for brazing ultra-hard materials(PCD/PCBN/MD/ND/CVD),tungsten carbide,ceramics and others, it’s fully automatic and very easy to operate at high efficiency.
Materials: Natural diamond, Monocrystal diamond, PCD,PCBN,CVD and cerment.
Substrate material: Cermet, tungsten carbide,steel, stainless steel, steel alloy, ceramic,etc.
Main Features:
1. PLC Control, SCR heating, touch panel, automatic implement after simple setting with easy temperature control.
2. No oxidation, clean surface, enviroment-friendly.
3. The machine is fully automatic and once loaded,the cycle time is approximately 70-120 minutes.
4. Reduction of distortion even very small tool insert can be brazed.
5. High brazing strength, 2 times higher than induction welding.
6. Advanced artificial quartz stone for table-board, elegant, high temperature resistance.
(We can also offer OEM according to clients’ requirements).
Vacuum Brazing Furnace is excellent for brazing ultra-hard materials(PCD/PCBN/MD/ND/CVD),tungsten carbide,ceramics and others, it’s fully automatic and very easy to operate at high efficiency.
Materials: Natural diamond, Monocrystal diamond, PCD,PCBN,CVD and cerment.
Substrate material: Cermet, tungsten carbide,steel, stainless steel, steel alloy, ceramic,etc.
Main Features:
1. PLC Control, SCR heating, touch panel, automatic implement after simple setting with easy temperature control.
2. No oxidation, clean surface, enviroment-friendly.
3. The machine is fully automatic and once loaded,the cycle time is approximately 70-120 minutes.
4. Reduction of distortion even very small tool insert can be brazed.
5. High brazing strength, 2 times higher than induction welding.
6. Advanced artificial quartz stone for table-board, elegant, high temperature resistance.
(We can also offer OEM according to clients’ requirements).
Technical Parameters:
|
Power Supply |
380V-3Phases-5 Wires/ 20KW |
|
Chamber Material |
Quartz Glass Tube |
|
Chamber Size |
180*500 (Dia. * H ) |
|
Brazing Capability |
CNGA 1204 apprx. 600pcs/cycle |
|
Max. Temperature |
950℃ |
|
Ultimate Vacuum level |
6.7*10-6 torr (6.7-10-4 pa) |
|
Brazing Vacuum level |
6.7*10-4 torr (6.7-10-2 pa) |
|
Heating Elements |
18pcs halogen tubes |
|
Cooling method |
Water cooling |
|
Brazing Process |
1. Cleaning 2. Fixing Solder Paste 3. Drying: 200℃ for 30min 4. Vacuum brazing |
