Website navigation

Product Display

Position:Home > Products > Tube Furnace > Rotatory Tube Furnace >
1600℃ Inclined Rotating Tube Furnace
1600℃ Inclined Rotating Tube Furnace

1600℃ Inclined Rotating Tube Furnace

Model:KJ-T1600-L5015-SWQ

Description:

The 1600℃ inclined rotary tube furnace is a CE-certified inclined rotary tube furnace with 1600℃ three temperature zones. It is designed for uniform sintering of powder at high temperature;

Products
Detailed
Product introduction:
    The 1600℃ inclined rotary tube furnace is a CE-certified inclined rotary tube furnace with 1600℃ three temperature zones. It is designed for uniform sintering of powder at high temperature; each temperature zone consists of three An independent temperature control system is individually controlled. By adjusting the temperature of each temperature zone, a temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 sections of temperature rise and fall programs can be set, and the B-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.

Technical Parameter:

product name

1600℃ Three Temperature Zone Inclined Rotating Tube Furnace

Product number

KJ-T1600-L5015-SWQ

Shell structure

Double shell with air cooling system

Furnace material

Furnace uses alumina polycrystalline fiber

Furnace tube size approximately

Φ50×1500mm

Heating zone

Three temperature zone heating, each temperature zone 220mm

Furnace tube material

Corundum furnace tube

Operating temperature

1500°C

Maximum temperature

1600°C

Temperature control method

Three temperature zones independently control temperature, each zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions

Flange joint

Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed

Sealing system

The furnace tube and flange are extruded and sealed with a silicone O-ring, which is easy to disassemble and reassemble, and has good air tightness. Vacuum and atmosphere can be evacuated during rotation.

Heating rate

0-10℃/min

Heating element

Silicon molybdenum rod

Operating Voltage

AC 220/380V 50Hz 

Maximum power approx.

10KW

Temperature measuring element

3 B-type thermocouples, independent temperature control

Vacuum

Pre-evacuated to -0.1MPa (value of vacuum pressure gauge)

Accessible atmosphere

Inert gas (slightly positive pressure)

Provide related accessories

Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc.

After-sales service

12-month warranty and lifetime warranty (except vulnerable parts)

Inclined Rotating Tube Furnace

 


MESSAGE

Contact Information

E-mail:
web@kejiafurnace.com
Address:
No.18 Hongye Road, Hi-tech zone , Zhengzhou, China, 450000
QQ tel Email WhatApp FaceBook

Tel Number

181-3719-5600

Email

web@kejiafurnace.com

WhatsApp

+86/18037178440

FaceBook

Zhengzhou/Kejia