Tel Number
181-3719-5600
Product introduction:
The 1600℃ inclined rotary tube furnace is a CE-certified inclined rotary tube furnace with 1600℃ three temperature zones. It is designed for uniform sintering of powder at high temperature; each temperature zone consists of three An independent temperature control system is individually controlled. By adjusting the temperature of each temperature zone, a temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 sections of temperature rise and fall programs can be set, and the B-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.
The 1600℃ inclined rotary tube furnace is a CE-certified inclined rotary tube furnace with 1600℃ three temperature zones. It is designed for uniform sintering of powder at high temperature; each temperature zone consists of three An independent temperature control system is individually controlled. By adjusting the temperature of each temperature zone, a temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 sections of temperature rise and fall programs can be set, and the B-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.
Technical Parameter:
|
product name |
1600℃ Three Temperature Zone Inclined Rotating Tube Furnace |
|
Product number |
KJ-T1600-L5015-SWQ |
|
Shell structure |
Double shell with air cooling system |
|
Furnace material |
Furnace uses alumina polycrystalline fiber |
|
Furnace tube size approximately |
Φ50×1500mm |
|
Heating zone |
Three temperature zone heating, each temperature zone 220mm |
|
Furnace tube material |
Corundum furnace tube |
|
Operating temperature |
1500°C |
|
Maximum temperature |
1600°C |
|
Temperature control method |
Three temperature zones independently control temperature, each zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions |
|
Flange joint |
Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed |
|
Sealing system |
The furnace tube and flange are extruded and sealed with a silicone O-ring, which is easy to disassemble and reassemble, and has good air tightness. Vacuum and atmosphere can be evacuated during rotation. |
|
Heating rate |
0-10℃/min |
|
Heating element |
Silicon molybdenum rod |
|
Operating Voltage |
AC 220/380V 50Hz |
|
Maximum power approx. |
10KW |
|
Temperature measuring element |
3 B-type thermocouples, independent temperature control |
|
Vacuum |
Pre-evacuated to -0.1MPa (value of vacuum pressure gauge) |
|
Accessible atmosphere |
Inert gas (slightly positive pressure) |
|
Provide related accessories |
Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc. |
|
After-sales service |
12-month warranty and lifetime warranty (except vulnerable parts) |
