Website navigation

Product Display

Position:Home > Products > Tube Furnace > Multi-Zone Tube Furnace >
Touch screen three temperature zone tube furnace
Touch screen three temperature zone tube furnace

Touch screen three temperature zone tube furnace

Model:KJ-T1200-L3015-KQ

Description:

Each temperature control system is adjusted in PID mode, and 30 steps of temperature rise and fall programs can be set. The K-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.

Products
Detailed
Product Introduction:
   The touch-screen three-temperature zone tube furnace is a three-temperature zone open tube furnace that has passed CE certification. Each temperature zone is separately controlled by three independent temperature control systems. For the temperature, four-stage temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 steps of temperature rise and fall programs can be set. The K-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.

Technical Parameter:

product name

Touch screen three temperature zone tube furnace

Product number

KJ-T1200-L3015-KQ

Furnace material

Furnace uses alumina polycrystalline fiber

Furnace tube size

Φ30×1400mm

Heating zone

Three temperature zone heating, each temperature zone 300mm

Furnace tube material

Quartz furnace tube

Operating temperature

1100°C

Maximum temperature

1200°C

Temperature control accuracy

±1℃

Temperature control method

Touch screen control, independent temperature control of three temperature zones, each temperature zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions

Flange joint

Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed

Sealing system

The furnace tube and flange are extruded and sealed with a silica gel O-ring, which is convenient to remove and can be removed repeatedly, and has good air tightness. Gases such as argon and nitrogen can be vented.

Heating rate

0-10℃/min

Heating element

Resistance wire

Operating Voltage

AC220V 50Hz 

Temperature measuring element

3 K-type thermocouples, independent temperature control

Vacuum

Pre-evacuated to -0.1MPa (value of vacuum pressure gauge)

Provide related accessories

Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc.

After-sales service

12-month warranty and lifetime warranty (except vulnerable parts)

three temperature zone tube furnace

 


MESSAGE

Contact Information

E-mail:
web@kejiafurnace.com
Address:
No.18 Hongye Road, Hi-tech zone , Zhengzhou, China, 450000
QQ tel Email WhatApp FaceBook

Tel Number

181-3719-5600

Email

web@kejiafurnace.com

WhatsApp

+86/18037178440

FaceBook

Zhengzhou/Kejia