Tel Number
181-3719-5600
Product Introduction:
The touch-screen three-temperature zone tube furnace is a three-temperature zone open tube furnace that has passed CE certification. Each temperature zone is separately controlled by three independent temperature control systems. For the temperature, four-stage temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 steps of temperature rise and fall programs can be set. The K-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.
The touch-screen three-temperature zone tube furnace is a three-temperature zone open tube furnace that has passed CE certification. Each temperature zone is separately controlled by three independent temperature control systems. For the temperature, four-stage temperature gradient can be formed in the heating zone or a longer constant temperature zone can be formed. Each temperature control system is adjusted in PID mode, and 30 steps of temperature rise and fall programs can be set. The K-type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃.
Technical Parameter:
|
product name |
Touch screen three temperature zone tube furnace |
|
Product number |
KJ-T1200-L3015-KQ |
|
Furnace material |
Furnace uses alumina polycrystalline fiber |
|
Furnace tube size |
Φ30×1400mm |
|
Heating zone |
Three temperature zone heating, each temperature zone 300mm |
|
Furnace tube material |
Quartz furnace tube |
|
Operating temperature |
1100°C |
|
Maximum temperature |
1200°C |
|
Temperature control accuracy |
±1℃ |
|
Temperature control method |
Touch screen control, independent temperature control of three temperature zones, each temperature zone can realize intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions |
|
Flange joint |
Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed |
|
Sealing system |
The furnace tube and flange are extruded and sealed with a silica gel O-ring, which is convenient to remove and can be removed repeatedly, and has good air tightness. Gases such as argon and nitrogen can be vented. |
|
Heating rate |
0-10℃/min |
|
Heating element |
Resistance wire |
|
Operating Voltage |
AC220V 50Hz |
|
Temperature measuring element |
3 K-type thermocouples, independent temperature control |
|
Vacuum |
Pre-evacuated to -0.1MPa (value of vacuum pressure gauge) |
|
Provide related accessories |
Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc. |
|
After-sales service |
12-month warranty and lifetime warranty (except vulnerable parts) |
