Website navigation
Powder PE-CVD System with Powder Feeding & Receiving
Powder PE-CVD System with Powder Feeding & Receiving

Powder PE-CVD System with Powder Feeding & Receiving

Model:KJ-1200X-III-PECVD

Description:

KJ-1200X-III-PECVD is a 1200ºC Rotatable Three -Zone Plasma-Enhanced Chemical Vapor Deposition (R-PE-CVD) system which is designed fro powder surface coating to form core-shell structure particles at the relatively lower temperature.

Products
Detailed
Specific Introduction:
    KJ-1200X-III-PECVD is a 1200ºC Rotatable Three -Zone Plasma-Enhanced Chemical Vapor Deposition (R-PE-CVD) system which is designed fro powder surface coating to form core-shell structure particles at the relatively lower temperature.  The automatic powder feeding and receiving system is built in for continuous powder coating.  Temperature, plasma power, and 4 channel gas MFC is controlled by touch screen panel and laptop computer for easy operation
Parameters:


System Structure

 
  • 0~25° adjustable tilt frame assists smooth powder loading/unloading
  • Integrated 300W (13.56Mhz) RF power supply with matching network enables the plasma enhanced processing which significantly reduces the needs for high-temperature process
  • Gear-driven tube rotation allows "blending" processing  powders to achieve the best processing uniformity 
  • Four-channel gas mixing station with MFCs provide precise control of gas delivery
  • Airtight powder feeder and receiver are included for continuous powder coating processing up to 1000 g.   

Three-Zone Rotary Furnace
 
  • Working temp: 1200ºC Max(<1hrs)., and 1100ºC for continuous heating 
  • Three digital temperature controllers with 30 segments programmable and +/-0.1 oC accuracy.
  • Input Power: 208 – 240VAC, a single phase at max. 4.0 KW.
  • The split cover enables faster cooling and easy operation
  • Three heating zones: 6"+ 12"+ 6",  total 24" ( 609 mm)
  • Constant temperature zone:  480 mm length +/-2ºC
  • Gear DC motor drives quartz tube with variable speed 2 - 10 RPM
Plasma RF Power Supply
 
 
  • Output Power:           5 -300W adjustable with ± 1% stability.
  • RF frequency:           13.56 MHz ±0.005% stability.
  • Reflection Power:      100W max.
  • Matching:                  Automatic
  • RF Output Port:         50 Ω, N-type, female
  • Noise:                       <50 dB.
  • Cooling:                     Air cooling.
  • Power:                      208-240VAC, Single Phase, 50/60Hz
Quartz Tube
  • One special designed 5'' O.D Fused quartz processing tube is included.                
Sealing Flanges
  
  • A pair of 1'' O.D quick disconnect flange with KF25 port are installed on each end of the tube
  • Magnetic fluid seal swivel coupling is used to enable the tube rotation without twisting the fireline or downstream attachments (such as gas, powder and electrical delivery lines)
Tube Rotation Speed
  • 0 - 5 RPM variable
Furnace Tilt Angle
  • 0~30°
Vacuum Pump & Gauge
 
  • EQ-FYP High-Performance Dual Stage Vacuum Pump is included in the sale
  • KF25 adapter and stainless steel bellows are connected between pump and tube flange
  • 10E-2 Torr vacuum can be achieved inside the processing tube   
  • Note: Vacuum Gauge is available at additional cost

MFC Gas Mixing Station
  
  • Four precision mass flow meters (0.02% accuracy) with digital displays are installed on the bottom case to control gas flow rate automatically.
    • MFC 1: Gas flow range from 0~100 SCCM
    • MFC 2&3: Control range from 0~200 SCCM  
    • MFC 4: Control range from 0~500 SCCM
  • Gas inlet/outlet fittings: 6mm O.D tube fitting
  • Power: 208-240VAC 50/60Hz
  • Stainless steel needle valves for manual ON/OFF control of gas supply.
  • Large PLC touch screen control enables easy flow rate settings
Volumetric Feeder and Collector Tank 
                  
  • EQ-PF-1S automatic feeder includes a motor-driven agitator and stainless steel hopper with a built-in vibrator. It is designed for feeding solid powder into a furnace for continuous firing/heat treating with adjustable feeding speed 0 - 97 ml/minute.
  • Stainless steel collection tank  ( 2 Liter Capacity ) can be installed on the other end of processing tube to gather the fired powder without exposure to air.
Dimensions & Weight
 
  • Furnace: 2800mm L x 800mm W x 1700mm H (with lid opened); Gas Mixing Station: 600mm L x 850mm W x 700mm H; the measurement is measured approximately.
  • Net weight: 400 Lbs.
  • Shipping Weight: 500lbs.
Warranty One year limited warranty with lifetime support (Consumable parts such as processing tubes, O-rings, and heating elements are not covered by the warranty, please order replacements at related products page).

 


MESSAGE

Contact Information

E-mail:
web@kejiafurnace.com
Address:
No.18 Hongye Road, Hi-tech zone , Zhengzhou, China, 450000
QQ tel Email WhatApp FaceBook

Tel Number

181-3719-5600

Email

web@kejiafurnace.com

WhatsApp

+86/18037178440

FaceBook

Zhengzhou/Kejia