KJ-1700X-III-F3LV is a CE certified three zones tube furnace with 60mm Dia. alumina tube, mechanical vacuum pump and three channels gas flowing system, which can heat sample to 1700°C and achieve vacuum degree up to 5x10^-2 torr and mix 1- 3 type of gases for CVD or diffusion.
Double layer steel casing with air cooling. Two cooling fans inside to keep the temperature of outside case < 55oC.
High purity fibrous alumina insulation for Max, energy saving.
Three independent heating zone via three precision temperature controllers.
|Power Consumption||10 KW|
|Input Voltage||AC 208-240V Single Phase, 50/60 Hz (75A air breaker required)|
Three zones: total 25" (630 mm) heating zone (included two refractory separators)
|Tube Size and Flange||
|European Temperature Controllers (optional upgrade)||
Heavy Duty Rotary Vane Vacuum Pump (7.8 CFM -240 L/m) with Two Stage Exhaust System installed inside the vacuum station. The vacuum system can reach 5x10^-2 torr within 30 minutes of pumping. ( 220V is available for the outside USA)
One KFD25 adaptor is installed to flange for connecting to vacuum pump.
Stainless steel pipe ( 25mm Dia x 1000mm length ) is included for connecting to tube furnace with KFD25 adaptor and clamps.
Option: For precise control of the vacuum pressure, we recommend you choose our turn-key solution EQ-VPC-MV. This is a vacuum pressure regulating system with motorized valve and gauge. It controls pressure range from 10^-6 torr ~ 760 torr.
Three Channel Gas Mixing and Delivery System
Three gas flow-meters ( 4% accuracy FS) are installed inside mobile case which are able to monitor gases flowing rate (three different kinds of gases in total)
1) Compact direct read flow meter, 10-100 cc/min.
2) Compact direct read flow meter, 16-160 cc/min.
3) Compact direct read flow meter, 25-250 cc/min.
One pressure meters is installed inside mobile cart which are able to monitor the pressure of mixing tank.
4 stainless steel needle valves are installed on the mobile cart
Two gas flowing pipes are provided for immediately use (one pipe from two mixed gases and another is independent gas)
Optional: in order to control gas delivery accurately, you may choose three channel gas delivery system controlled by precision digital mass flow meter at extra cost.
|Oxygen Monitoring||An Oxygen Sensor can be used to monitor the oxygen level of gas(es) used in CVD systems for preventing or reducing oxidation.|
Power Cable & Plug
10 feet length 8-3 AWG heavy duty UL approved power cable is included
Extra length cable can be ordered by clicking picture on left
Plug is not included, you can order from your local hardware store according to female plug in your lab
Furnace: 863 L x 457 W x 711 H mm (34 L x 18 W x 28 H inch)
Gas cart: 850 mm (L) x 600 mm (W) x 700 mm ( H)
|Net Weight||150Kg (furnace) + 100Kg ( total 550lb)|
|Shipping Weight||800 lbs|
|Shipping Dimensions||Two cases in one pallet: 45x45x35/case|
|Warranty||One year limited manufacturer's warranty (Consumable parts such as processing tubes, O-rings and heating elements are not covered by the warranty, please order replacements at related products page).|