Website navigation

Product Display

Position:Home > Products > CVD/PECVD System > Low Vacuum System >
Graphene-Growing CVD System
Graphene-Growing CVD System

Graphene-Growing CVD System

Model:KJ-1200-S6014LK1-H

Description:

KJ-1200-S6014LK1-H CVD System consists of a tube furnace, a three-channel gas-mixing unit with mass flow meters, a vacuum pump unit.

Products
Detailed
Range of Application:
This CVD system is specially designed for graphene growth and also for other CVD experiments which require fast heating and cooling. The hot furnace chamber can be pushed directly to the cold side to fast-heat the samples and also the opposite way for fast cooling.
 
Parameters:

Product name

Graphene-Growing CVD System

Model

KJ-1200-S6014LK1-H

Tube Furnace

Type

Slide-type

 

Insulation layer

Alumina ceramic fiber

 

Max. Temperature

1200℃

 

Working Temperature

≤1100℃

 

Outside Shell Temperature

≤45℃

 

Heating Rate

20℃/min (Suggestion 10℃/min)

 

Heating Zone Length

300mm (Single Zone)

 

Heating Element

0Cr27Al7Mo2 resistance wire

 

Temperature Sensor

K-type thermocouple

 

Temperature Control Accuracy

±1℃

 

Tube

Quartz tube

Φ50, 60, 80, 100, 150mm available.

 

Temperature Controller

PID automatic control with 30 programmable segments for precise control

 

Sealing

Flanges made of 304SS and silicon rubber rings

Gas valve on left flange

Vacuum angle valve with KF25 connector on the right flange

Note: Standard flange, KF flange and hinge flange are available.

 

Power Supply

Single phase, 220V, 50Hz.

 

Power

Power 3kW

Vacuum pump unit

Vacuum pump

(With movable box)

10pa with a mechanical vacuum pump

0.001pa with a mechanical vacuum pump and a diffusion vacuum pump.

 

Pressure Gauge

Inficon Digital Pressure Gauge with high accuracy

Measurement Range 1×105--1×10-5Pa

Gas-Mixing Unit with mass flow meters

Three precise mass flow meters (0.02% accuracy) are installed to control gas flow rate with touchscreen control for easy operation.

One gas mixing tank is installed on the bottom case.

MFC 1: Gas flow range from 0~100 SCCM

MFC 2: Control range from 0~200 SCCM  

MFC 3: Control range from 0~500 SCCM

Gas inlet fitting: four 1/4NPS.

Gas outlet fitting: four 1/4NPS.

Power: 185-220VAC 50/60Hz

4 stainless steel needle valves are installed on the left side to manually control the inlet and outlet of gas.

Chiller (Optional)

Be used to cool the tube and vacuum pump.

Notes

Pressure higher than 1.02Mpa will break the tube.

Since the pressure in the gas cylinder is high, a converter is necessary. The measurement range of our converter is 0.01mpa-0.1mpa, will ensure a safe gas supply.

No vacuum condition is allowed when the temperature is higher than 1000℃.

Please keep the gas flow lower than 200sccm when the temperature is high to lower the impact of cold air to the hot tube.

If you have to keep the valves on the two ends of the tube closed at the same time, please watch the pressure gauge and open the valves once the pressure is higher than 1.02Mpa to avoid any tube breakage.

Warranty

One year with lifetime technical support.

 


MESSAGE

Contact Information

E-mail:
web@kejiafurnace.com
Address:
No.18 Hongye Road, Hi-tech zone , Zhengzhou, China, 450000
QQ tel Email WhatApp FaceBook

Tel Number

181-3719-5600

Email

web@kejiafurnace.com

WhatsApp

+86/18037178440

FaceBook

Zhengzhou/Kejia