Tel Number
181-3719-5600
Brief introduction:
With 0Cr27Al7Mo2 resistance as heating element, double layers of alumina ceramic fiber as insulation layer, and 30-segment-programmable controller, its temperature can go up to 1200℃ and work continuously for long time at 1100℃. It characterize with uniform temperature, low surface temperature, fast heating and cooling, high energy efficiency. It’s an ideal furnace for high temperature sintering, annealing and quality test in laboratory, universities, enterprises and research institutions.
Parameters：
With 0Cr27Al7Mo2 resistance as heating element, double layers of alumina ceramic fiber as insulation layer, and 30-segment-programmable controller, its temperature can go up to 1200℃ and work continuously for long time at 1100℃. It characterize with uniform temperature, low surface temperature, fast heating and cooling, high energy efficiency. It’s an ideal furnace for high temperature sintering, annealing and quality test in laboratory, universities, enterprises and research institutions.
Parameters：
|
Model |
KJ-M1200-8LZ |
|
Working Chamber Size |
200*200*200mm |
|
Heating Chamber Material |
High-Purity Alumina Ceramic fiber |
|
Working temperature |
Top temperature: 1200℃ Working temperature: 1100℃ |
|
Temperature Control |
PID, Intellectual 30-segment Programmable Controller |
|
Heating Rate |
0--20℃ /min |
|
Control Accuracy |
±1℃ |
|
Heating Element |
0Cr27Al7Mo2 Resistance Wire |
|
Temperature Sensor |
K-type Thermocouple (With Breakage and over-heating alarm) |
|
Outside Shell |
Electrostatic sprayed Carbon Steel Outside Shell with Cooling Fans |
|
Door |
Side-open Design |
|
Power Supply |
220V 50HZ/60HZ |
|
Plug |
Please let us know the plug in your country when you book the furnace. |
|
Max. Power |
4kW |
|
Accessories |
Crucible Tong, Gloves, Instruction manual |
|
Option |
Crucible, Screen Control, Software |
|
Notes: |
1, In order to ensure the longest possible service life of furnace parts, we recommend heating rate no higher than 10℃ /min. 2, Cooling rate no higher than 5℃ /min. 3, This furnace is not air-tight. 4, It is normal that there will be tiny cracks on the wall of the heating chamber, they won’t affect the performance of the furnace, and can be repaired with alumina coating. 5, The heating chamber is replaceable. 6, We suggest you put the furnace in the fume hood if the material you heat release smoke or any harmful gas. |
|
Warranty |
One year warranty with life-time technical support. Special notes: 1, Consumables like heating element, quartz, crucible and so on are uncovered. 2, Man-made damage and damage caused by misuse are uncovered. |
