Website navigation

Product Display

Position:Home > Products > Atmosphere furnace > 1500℃-1700℃ >
Customized high temperature atmosphere furnace
Customized high temperature atmosphere furnace

Customized high temperature atmosphere furnace

Model:KJ-A1700-8L-DZ

Description:

This customized high-temperature atmosphere furnace is mainly used in college laboratories, industrial and mining enterprise laboratories.

Products
Detailed
Product introduction:
  This customized high-temperature atmosphere furnace is mainly used in college laboratories, industrial and mining enterprise laboratories, for chemical analysis, physical determination, sintering and dissolution of metals, ceramics, etc., used in electronic components, powder metallurgy, magnetic materials, quartz materials The debinding, pre-firing and firing of other products can also be used for heat treatment processes of other materials. The furnace body adopts a double-layer furnace shell structure, high-performance heat insulation material, and is equipped with a cooling fan, which makes the surface temperature of the furnace body lower and saves 60% energy compared with ordinary furnaces. The furnace door and furnace roof are sealed with high-temperature silicone rubber, which can be pre-evacuated and can be introduced into a variety of inert gases.
   It adopts double shell structure and intelligent program temperature control system, phase shift trigger, SCR control, and the furnace adopts oxidation. Aluminum polycrystalline fiber material, double-layer furnace shell is equipped with an air cooling system, the furnace has the advantages of balanced temperature field, low surface temperature, fast temperature rise and fall, and energy saving.
Structural composition:
The customized high-temperature atmosphere furnace consists of a high-temperature atmosphere furnace, a gas supply system and an exhaust gas treatment device.
technical parameter:

Product number

KJ-A1700-8L-DZ

Furnace structure

Double-layer shell structure, equipped with a cold air system to automatically cool the furnace shell

Furnace material

High-quality and high-purity alumina polycrystalline fiber curing furnace, with good insulation performance, high reflectivity and balanced temperature field

Maximum temperature

1700 ℃

Operating temperature

≤ 1600 ℃

Heating rate

Recommended ≤ 10 ℃ /min

Heating zone size

200*200*200mm , width * height * depth)

Temperature Control System

With PID adjustment and self-tuning functions, and can program 30 sections of temperature rise and fall programs;

Heating element

High temperature silicon molybdenum rod

Temperature measuring element

Type B thermocouple

 

interface

The furnace is equipped with inlet, outlet and vacuum ports, and there are float flow meters and mechanical vacuum pressure gauges on the gas path

 

Sealing system

The furnace door and roof are sealed with high temperature silicon rubber. The furnace has air inlets and outlets for gas and vacuum

 

Gas line

One nitrogen float flow meter , one hydrogen float flow meter

Power supply

AC220V , 50/60Hz

rated power

8KW

Door opening method

Side door

Vacuum pump

VRD-8 rotary vane pump pumping speed 2.2L/S

Ultimate vacuum

-0.1M Pa

Exhaust gas treatment device

The hydrogen combustion device can automatically ignite the eliminated hydrogen

The standard configuration

Crucible tongs a handle, a high temperature gloves 1 pair, instructions 1 parts certificate warranty card 1 parts

Remarks

Please pay special attention to: H2 is a particularly flammable and explosive gas. Its combustion temperature is 400 ℃. It will explode when the mixing ratio with air reaches 4.0%-74.2% , so safety measures must be taken when using hydrogen.

The maximum pressure that can withstand in the furnace is 0.03MPa , so a pressure reducing valve must be installed on the gas cylinder when gas is introduced into the furnace.

Before entering hydrogen, inert gas must be used to clean the furnace. The pressure inside the furnace should always be kept between 0.01-0.02 Mpa during use to prevent air from flowing back into the furnace and causing an explosion.

The room where the equipment is placed must be well ventilated.

 

The discharged hydrogen must be combusted indoors (the top of the furnace body is equipped with an automatic ignition device) In order to keep the pressure in the furnace chamber relatively stable during the heating process, we recommend that the equipment increase

Temperature rate is less than 10 ℃ /min


high temperature atmosphere furnace

 


MESSAGE

Contact Information

E-mail:
web@kejiafurnace.com
Address:
No.18 Hongye Road, Hi-tech zone , Zhengzhou, China, 450000
QQ tel Email WhatApp FaceBook

Tel Number

181-3719-5600

Email

web@kejiafurnace.com

WhatsApp

+86/18037178440

FaceBook

Zhengzhou/Kejia